All the necessary components are mounted on a single chassis: Twin compartment feed hopper, dryer, automatic burner, hot stone elevator, inclined vibrating screen, loadcell weighing system, twin-shaft paddle mixer, primary dust cyclones and full PLC controls.

The plant is mounted on a fully mobile chassis with pneumatic tyred running gear and fifth wheel towing attachment for towing vehicle.

The screening and mixing section of the plant and the hot stone elevator are pivoted off the main plant chassis and can each be raised manually with no cranes necessary to their operating positions within minutes.

Minimal foundations are required for installation as each unit has landing legs with support bases to ensure adequate stability.

Chassis mounted consoles with all necessary push-button starters, burner controls and PLC based, automatic weighing/mixing cycles with recipe storage via a touch screen interface. Alternatively the console can be mounted in an optional control cabin.

An inverter maintains infinitely variable speed control over the exhaust fan thereby controlling the airflow through the dryer, resulting in greater fuel economy and reduced plant energy costs.

For greater control over aggregate feeds the plant can be used with a separate three or four bin mobile cold feed unit with variable speed control on each feeder.

The control consoles can be mounted in an optional separate cabin.

For projects in environmentally sensitive locations, the Super-RoadMix can be combined with a mobile or fixed bag filter to contain emission levels to less than 20mg/m³. Collected dust is screwed directly to the mixing section filler weigh hopper on the plant, for reintroduction into the mix.

Fully mobile or transportable, hot oil or electrically heated bitumen tanks and pumping systems are available to compliment the plant.